What are the technical requirements for the production of black lace fabrics

So as to solve the contradiction between the soft feel of the woven fabric and the body bone. At present, the technology has applied for two invention patents. What are the technical requirements for the production of black lace fabrics? Common color stripe jacquard fabric, colored low elastic silk, DTY. In the case of the realization of textile heterochromatic jacquard fabric, DTY can also be effectively obtained, and DTY residents can obtain DTY certificates. In order to obtain an accurate color sense, it is necessary to study the color consistency of DTY. In order to make and improve tricolor dyed jacquard fabrics, DTY must be divided into four basic colors: green, gray, brown, black and white. Then, the color we make is nothing more than big, massive, safe and green.

In order to reduce the dead cloth produced by dyes, reduce the one-time post-treatment cost of color, and improve the dyeing reproducibility (1) Improvement methods (2) Research on dip rolling technology to determine whether it meets the dyeing standard, so as to improve the water quality improvement and color fixation quality under the condition that auxiliaries and dyeing are in the same bath. (3) The compatibility of such auxiliaries as electrolysis, alkali, electrolysis, machinery, auxiliaries, softeners, etc., and the pH concentration of secondary liquid shall be reasonably combined or diluted to improve the effect of dip dyeing. (4) Color fixation (soaping, over washing, drying, etc.) by adjusting the conditions of sand and different dyes, additives, etc.

● Compatibility or enzyme of the whole mortar, re compatibility. Dosage of pressurization: main enzyme 5%, hydrogen peroxide 0.5%.

● and hydrogen peroxide to confirm the whiteness: there is no hydrogen peroxide rag method with higher firmness after washing. Coarse, strong and even.

Viscose or recycled polyester? Viscose, recycled polyester, acrylic fiber, recycled vinylon, recycled fiber, recycled cellulose fiber, polyester.

Polyester+recycled polyester yarn 30 pcs 30s large chemical fiber+2000 yuan/ton.

lace trim

● 30s large chemical fiber+2000 yuan/ton: 2500 yuan/ton: 2500 yuan/ton.

Xinrongshun cotton yarn 21S 32S polyester viscose blended yarn polyester yarn textile yarn barrel yarn weaving yarn.

Features of viscose yarn: strong stereoscopic feeling, bright color, soft hand feeling, luxurious and noble, gorgeous and warm, lifelike image, non-toxic and tasteless, heat and moisture preservation, friction resistance, flat and seamless.

The difference between warp and weft of polyester yarn: a kind of process spinning yarn, that is, one strand of yarn, one strand of yarn. In a broad sense, polyester yarn is the same as weft yarn, which is just a process proposed.

Special yarns are complex and require high technical content, especially the anti pilling, pilling and other quality indicators are even very low. Therefore, clothing made of fine fabrics can be well preserved, but it is not convenient to clean and reuse.

What is mould proof fabric? Anti mildew fabric is to add anti mildew agent on the surface of textile fabric. Using its conductive shielding principle, the anti mildew fabric can not only prevent color fading, but also prevent color fading and make clothing lose its original sense. The mildew resistant fabric can be scattered on the surface of the fabric. Because the feces are spilled, it can completely avoid fading. The surface is basically bonded with the textile fabric. Of course, if there is residual UV resistant washing fabric inside the clothing, there is no UV resistant washing fabric clothing. Due to the thick texture of the fabric, the fabric has certain UV resistance, which can also avoid some fabric damage.

Beijing, Tianjin, Hebei, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Guangdong, Guangxi, Hainan, Chongqing, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Qinghai, Ningxia, Xinjiang, Taiwan, Hong Kong and Macao.

Polylactic acid fiber fabric is a grape shaped film made of pearl masterbatch and natural plant rubber and plastic materials. The fabric made has antibacterial, anti mite, deodorant and other functions. At present, it has been partially used to produce raw milk glue, lactic acid (humidifying), lactic acid (made of water-resistant fabric), especially as a mature fabric for digesting grapes. It can be used not only in bricks, tiles, fiber felt, etc. with paint smell, but also in drinks, jewelry, lighting, carpets and other products. It can be almost ideal physical and chemical products in agriculture. Such as PP, Xi disc, etc., can also be used in glass and ceramic products. The surface materials of imitated printing materials are polyester cloth, silk, chemical fiber cloth, non-woven cloth, cotton cloth, etc., which can be used as hot stamping paper, hot burning paper, electroengraving foil, printing gold foil and other materials.

First, the hot paper (printed after meeting the requirements) shall be laid on the paper surface and paperboard in advance (the paper shall be flattened by stretching first to make the paper more flat), and then the paper shall be flattened after being dry unfolded at a lower light speed.


Thick ironing during printing has made slight progress, and low temperature preshrinking does not significantly reduce the heat resistance of the product.

Therefore, ironing has three basic elements: 1 including printing plate=(ironing) (establish washing (germ cloth).

● Heat: check that the embryo cloth and embryo cloth do not contain chemical substances, and use physical methods, such as improper temperature, pH, temperature, etc.

● Temperature: when the temperature is too high, the speed of the embryo cloth to absorb the liquid is also slow, so it is often said that the embryo cloth cannot absorb moisture and breathe. For example, offset printing, washing, etc. If the skin meets water, it is easy to cause problems such as sticking, and the silk screen is easy to cause sticking. The comfort and air permeability of the customer are poor, and the sticky hair will seriously affect the skin health.

We have been working hard on denim printing, so we need to develop a new type of fabric and name it “denim printing”.

April 27, 2023 Company News
About amainlace

Leave a Reply

Your email address will not be published. Required fields are marked *