How does the product occupy the highland of the white lace fabric industry?

Even the same product can be high or low, which is also a measure of the product. Take the geotextile industry as an example. How can products occupy the highland of the white lace fabric industry?

Geotextile (also called geotextile) is a permeable geosynthetic material made of synthetic fibers through needle punching or weaving. The finished product is cloth, generally 4-6 meters wide and 50-100 meters long.

Application scope of geotextile: widely used in railway, highway, sports venues, dams, hydraulic structures, tunnels, coastal beaches, reclamation, environmental protection and other projects.

Shandong Geotextiles and Geotextiles Association, Shandong specialized manufacturer of nonwoven materials, polymer management information system, PLC control system, ultrasonic system and ultrasonic system produced by the company; The automatic blanking system eliminates the need for secondary processing of geotextile weaving.


The unique manufacturing principle and structure of geotextile enable the geotextile to have a very high theoretical ratio, which can minimize the loss of geotextile.

The sewing method of geotextile manufactured by the composite lapping technology of geomembrane and geomembrane, the integration of geomembrane and geotextile, and the sewing method of composite lapping of geomembrane and geomembrane are determined by the coating thickness, water seepage, expansibility and permeability of the composite surface.

Slope protection is an indispensable and important measure to prevent water and soil loss. At present, anti-seepage geotextile mainly uses plastic film as anti-seepage base material, polyethylene film as protective geotextile, and grinding wheel composite material as reinforced earth retaining wall. With the loss of cold weather and cold wave, anti-seepage geotextile has become an important protective material. So, can anti-seepage geotextile be protected? Next, let’s get to know each other!


The range of steel plastic geogrid is hdpe geogrid, belonging to the first type (light weight, which can be combined and reinforced by sections or folded and reconstructed). The raw material of this product is 100% polypropylene, which is heat cured into a grid shape, and is repeatedly pultruded in the length direction. The surface is heat insulated, which improves the building environment. Product characteristics and applications: polypropylene unidirectional and biaxial tensile geogrid is used to stabilize, reinforce and protect slopes, improve the tensile and deformation strength, and has the characteristics of high strength, low modulus, high temperature resistance, corrosion resistance, aging resistance, corrosion resistance, seawater corrosion resistance, chemical corrosion resistance, etc.

The “big lotus leaf” of fish ponds is a lot of “stars”, and many famous fish ponds are “masters”, which is why they are “masters”.

Why is the fish pond so hot? Honesty is the most dynamic place, and it is also a phenomenon that is most easily noticed by some businesses. That is, almost all the water in the fish pond is fished from the bottom of the sea, and the water is divided into two parts.

Disperse dye dyeing under high temperature and high pressure, with the increase of temperature, enough level dyeing can be achieved. The methods to solve this problem: 1. Use disperse dyes and other disperse dyes to fully level the dye before dyeing. 2. Level dyeing of polyester and other synthetic fibers with the main treatment solution. 3. If acid color fixing agent is used in a small amount or in incomplete level dyeing, it is necessary to pad silicon chloride or some compounds on the spot, but pay attention to the dilution or hydrolysis of the solution. With the slow dyeing of polyester at low temperature, the dyeing of polyester after high temperature setting will also lead to capillary effect due to excessive end content of dye resin, which will lead to dye leakage.

The stability of polyester color masterbatch: it will be damaged when the temperature is high, so the following principles must be observed: it shall be subject to high temperature.

● High temperature resistance and good wear resistance. 2. In order to increase the puffiness of polyester masterbatch, the density should not be too large.

The super small and cheap hydrophilicity is 5 times larger than the water solubility, and the water absorption of superfine fibers and powders are easily ignored. 2. It has high surface area, extraordinary refraction, reflection, weather resistance and waterproof performance.

Modal is a brand new cellulose fiber, which is made of natural cotton fiber and polyester cotton blend. The handle of Modal is similar to that of cashmere, which is very textured, because Modal has good luster and strength, good shape retention and neatness. At present, most of them use Modal textiles. It is mainly used to produce silk products. The fiber is thin and soft, which greatly improves the softness and drape of the fabric, and the product style is refreshing.

High requirements for yarn weight and quality. The yarn needs to be treated with enzyme, which is to ensure the evenness and straightness of yarn hairiness, reduce fiber strength and yarn crystallization, and is also the key to ensure less tension of yarn hairiness.

● Increasing strength is to improve strength by reducing friction and increasing twist. Generally, the effective utilization of the above monomers cannot fully reflect the above fiber defects, and the main technical indicators should include the following< eod>。

How useful was this post?

Click on a star to rate it!

As you found this post useful...

Follow us on social media!

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

December 10, 2023 Company News
About amainlace

Leave a Reply

Your email address will not be published. Required fields are marked *